Pigeon Net Kit For 14-20mm Steelwork 10m x 10m
£128.40 (£107.00 ex vat)
No drilling required.
Kit is available in four flange thickness size ranges, 2-4mm, 4-8mm, 8-14mm & 14-20mm
Kit comes complete with everything needed for the installation of a 10m x 10m 50mm mesh pigeon net secured to the flanges of "I" or "C" section structural steelwork.
Includes 10m x 10m pigeon net in your choice of colour, corner & intermediate fixings, perimeter & straining products all in galvanised steel & specialist tools.
You will need to know the flange thickness being secured to prior to ordering the correct intermediate fixing size.
This kit is an excellent "no drill" method of fixing pigeon control netting to steel beams and girders fast and securely using bolt-up clamps for the corner fixings and hammer-on sprung-steel beam clips for the intermediate fixings.
|The kit contains|
|Pigeon net, 50mm mesh - 10m x 10m in either black, stone, translucent or no flame X 1|
|0-20mm Corner Beam Clamps in galvanised steel X 4|
|Intermediate Beam Clip Fixings in chosen size range of 14-20mm x 40|
|Wire Rope 7/7 2mm diameter in galvanised steel 50M reel|
|M5 Barrel Strainers in galvanised steel (tensioning products) X 4|
|Wire rope grips in galvanised steel X 16|
|Hog ring staples (For fixing the net to the wire rope) in galvanised steel X 800|
|Sprung Net Shears (For easy cutting of the Net) X 1|
|Hog Ring Stapler X 1|
|Wire Rope Grip Nut Spinner (For tightening the wire rope grips) X 1|
|Wire Rope Cutters for ease of trimming the wire rope X 1|